RVB3000
SpreaderSee What We Can Spread
The Revolution™ V-box poly hopper is specifically designed to never collapse. This might seem odd but that is the main reason that poly spreaders don’t last. While we beefed up the construction we added specific tie-down connection points and anti-crush zones. You deserve quality.
Our PATENTED Inverted Vee (NOT NEEDED or AVAILABLE on RVB10 and RVB500) is actually one of the secrets to the success of this V-Box spreader. The design allows the contractor to dial in the specific amount of material that will drop to the auger BASED on the material they are spreading.
The Revolutionary RS Controller offers Constant Drive and Auto Mode that allow customization of the independent auger and spinner and vibrator in maximizing material distribution. In addition, the controller operates key accessories such as pre-wetting systems and lighting.
The chutes are available in 16” short chute and 29” long chute. Easy on/off stainless steel and roto molded chute has a 16” four flute poly spinner to provide you long life and superior spread pattern up to 30’.
Choose a short chute or long chute to go with your RVB spreader (not included) See Spec chart for measurements.
Applications
9 Models: Fits UTV to Class 7 Trucks
Exclusive Benefits
for V-Box Sno-Way® Spreaders
- Military Grade Primer & Powder-Coat Paint Finish
- The easy on/off stainless steel and roto molded chute has a 16” four flute poly spinner to provide you long life and superior spread pattern up to 30’.
- The inside of the poly hopper walls are designed for maximum flow of the toughest materials to minimum size material bridging.
- Patented, adjustable inverted vee. Adjust the inverted vee system to match the material you want to spread.
- The Revolution™ V-Box family has a roto molded perimeter with ribbed hopper, mounted to an all stainless steel frame and drive support.
- The 1/2 horsepower direct drive gear box and 1/3 horsepower spinner motor are fully enclosed so that water and salt does not penetrate.
- One harness supplies all of the power from the battery to the hopper, with a water-tight Duetsch connector and seal to connect them. The harness is plug and play for accessories. No cutting or splicing.
- Optional Wetting System with Filling Station available.
Patented Products Make All The Difference
The combination of the RS Controller, Patented Inverted Vee (NOT NEEDED or AVAILABLE on RVB10 and RVB500) and the Auger Drive is what makes this Revolution™ RVB Spreader work so well. A contractor has the ability to spread any materials demanded by the client with a consistent pattern at the proper speed and with no loss of valuable material. By dialing in the specific flow of material to the auger and then controlling the auger speed independent of the spinner speed the contractor has ultimate control of every necessary component of the hopper spreader.
- The Revolution™ V-Box family has a roto molded perimeter with ribbed hopper, supported by a custom frame and drive support.
- The easy on/off stainless steel and roto molded chute has a 16" four flute poly spinner to provide you long life and superior spread pattern up to 30'. Available in 16” short chute or 29” long chute. Choose one to go with your RVB Spreader (chute not included with spreader).
- The 1/2 horsepower direct drive gear box for the auger and a 1/3 horsepower spinner motor are fully enclosed so that water and salt do not penetrate.
- The inside of the poly hopper walls are designed for maximum flow of the toughest materials to minimize size material bridging.
- One harness supplies all of the power from the battery to the hopper, with a water-tight Duetsch connector and seal to connect them. The harness is plug and play for accessories. No cutting or splicing.
- Adjustable patented inverted vee (NOT NEEDED or AVAILABLE on RVB10 and RVB500). Adjust the inverted vee system to match the material you want to spread.
- Optional Wetting System with Filling Station available.
RS CONTROL Has:
- Push Button to: turn on/off vibrator or vibrators
- Turn on/off optional light
- Turn on/off optional wetting system
- All functions can be controlled in Auto Mode