Are you looking for a salt spreader for a truck or UTV that is built with a professional ice management specialist in mind? Are you needing something more than your average tailgate spreader? Look no further! The Revolutionary V-Box RVB10 salt spreader has exactly what you are looking for!
A Legacy of Innovation
Sno-Way has worked hard to bring innovation to the snow plow industry. Continuing that legacy, they have brought the same innovation to the salt spreaders we use throughout the season. The flagship group among these spreaders is the REVOLUTION V-BOX spreaders. Built to be tough and dependable, these workhorses are your go-to solution for ice management! We have thought of every concern and need that an ice management specialist has in mind and designed our spreaders to be the answer you are looking for in a salt spreader for a truck or UTV.
A Revolution in Salt Spreaders for Truck
The Poly Dual Electric RVB spreaders are built for a professional snow and ice removal specialist. The Revolution Spreader line uses a heavy-duty electric motor with a 1/2-horsepower direct-drive gearbox to run the auger. A 1/3-horsepower electric motor and a direct drive gearbox run the spinner. Both motors and drives are fully enclosed so that water and salt do not penetrate.
One harness supplies all of the power from the battery to the hopper, with a water-tight Duetsch connector and seal to connect them. The harness is plug-and-play for accessories with no cutting or splicing required. We have also provided precut holes in the framing to allow for the wiring to be tucked away and safe from pulls or cuts.
Speaking of the frame, the RVB spreaders are outfitted with a frame with a triple-protection coating. We start with a zinc phosphate wash as an initial layer to prevent corrosion. This is followed by an automotive-style E-coat that penetrates the metal, bonding with it electrically to the metal. This primer method prevents rust from ever starting. We complete the process with a military-grade powder coat for a tough exterior.
The inside of the poly hopper walls is designed for maximum flow of the toughest materials to minimize material bridging. The Poly Hopper is mounted on an E-Coat primed and then Powder-Coated custom frame and drive support to give you a spreader that will provide you years of service. Sno-Way is known for having the best spread pattern in the industry. The Sno-Way RVB spreaders will NOT disappoint!
The Revolution V-Box family has a roto molded perimeter with a ribbed hopper, supported by a custom frame and drive support. The easy on/off stainless steel and roto molded chute has a 16” four flute poly spinner to provide you long life and superior spread pattern up to 30’. The chute is available in 16” short or 29” long models. You will need to choose one to go with your RVB Spreader, as the chute is not included with the spreader.
Part of our standard features also includes our RS Controller. The intuitive design of the control allows the professional snow and ice removal expert to gain an advantage over competitors’ units. Contractors that use the Revolution V-Box spreaders along with the RS control are able to save time, reduce wasted material and get the job done with greater profit. The RS Controller allows you to adjust auger and spinner speed independently using pinwheels to increase or decrease the speed of the auger or spinner.
What Makes the RVB10 Special
Our RVB10 is one of two of our Revolution V-Box units designed to make it perfect for UTVs and can also be used for larger vehicles. With a 10-cubit-feet capacity, it allows you to cover a parking lot or short lane with one fill. We have worked hard to keep the empty weight of the spreader down to allow you to fill it with more material. We have also built it to be tough enough to handle the full load!
Both the RVB10 and RVB500 units have an optional drop spreader hood. This option transforms then from a broadcast spreader to a drop spreader in one quick step! The drop spreader option is helpful when you have to cover sidewalks or pavement with heavier foot traffic. Just remove the hood to transform your spreader back to broadcast to handle your parking areas and access lanes.
Accessorize Your Salt Spreader For Truck or UTV
Sno-Way has provided a wide variety of accessories to help you to customize your spreader for your particular use. Choose any one of these options…or all of them!
JAM RELEASE MECHANISM: Jams can happen, even with the best spreaders. This device is a lifesaver keeping you from digging out the hopper. Simply insert it into the end of the Auger Shaft and the use of a simple ratchet wrench and you are back in business. This tool is for use on any of the RVB spreaders.
SWS FILLING STATION: A companion accessory for our optional Salt Wetting System (SWS) is the SWS Filling Station. The 120-volt pump fills your 30-gallon tank at the rate of 5 gallons per minute. Quick and easy, it eliminates the need to remove the tank for filling.
CONSTANT DRIVE FEATURE: This Revolution V-Box option maintains auger speed and spinner speed to control your output as material loads change on the auger or spinner. Comparable to how the cruise control works on your truck. This system works as a flow control to maintain your set output.
DROP SPREADER HOOD: Sno-Way innovation has designed a system that allows you to use your RVB10 or RVB500 as a broadcast spreader or a drop spreader. Use the Sno-Way exclusive Drop Spreader Hood and attach it to your spreader chute. It gives you a 30”-60” spread. This easy on/off hood allows you to convert your spreader from a broadcast spreader to a drop spreader and back again. This can be done in less than a minute with no tools. When used as a broadcast spreader, the hood stores easily on the built-in carrier. Made of high-density polyethylene to hold up to harsh winter elements.
RVB SPREADER LIGHT KIT: Sno-Way’s RVB spreader light kit conveniently mounts to your spreader and supplies excellent illumination for increased visibility during early morning or night salting applications. Includes mount hardware and easy plug-and-go circuitry. This option is available for use with all RVB spreaders.
SNO-WAY VIBRATOR MOTOR KIT: Our vibrator motor kit easily bolts to your Sno-Way hopper. The motor provides consistent agitation of spread material for superior flow to the receiver spreader spinner. All of our RVB models include one vibrator motor a standard equipment. You are able to add a second one to enhance the performance of your spreader as needed.
Get Your Sno-Way RVB Spreader Now
Now is the time to get the best spreader on the market! Contact the closest dealer and their sales staff will be happy to help you figure out the best salt spreader for truck or UTV. Let our commitment to excellence and innovation help you to “Move It”!