RVB 10 & 500 Spreaders Series

The Poly Dual Electric RVB spreaders are built for the professional snow and ice removal specialist. The Revolution Spreader line uses a heavy duty 1/2 horsepower electric motor, direct drive gear box to run the auger and a 1/3 horsepower electric motor, direct drive gear box to run the spinner. The Poly Hopper is mounted on a E-Coated and then Powder Coated stainless steel frame and drive support to give you a spreader that will provide you years of service. Sno-Way is known for having the best spread pattern in the industry, and the Sno-Way RVB spreaders will NOT disappoint.

EXCLUSIVE BENEFITS

Exclusive Benefits

for V-Box Sno-Way® Spreaders

  • The Revolution V-Box family has a roto molded perimeter with ribbed hopper, mounted to an all stainless steel frame and drive support.
  • The easy on/off stainless steel and roto molded chute has a 16" four flute poly spinner to provide you long life and superior spread pattern up to 30'.
  • The 1/2 horsepower direct drive gear box and 1/3 horsepower spinner motor are fully enclosed so that water and salt does not penetrate.
  • The inside of the poly hopper walls are designed for maximum flow of the toughest materials to minimize size material bridging.
  • One harness supplies all of the power from the battery to the hopper, with a water-tight Duetsch connector and seal to connect them. The harness is plug and play for accessories. No cutting or splicing.
  • Patented, adjustable inverted vee. Adjust the inverted vee system to match the material you want to spread.
  • Optional Wetting System with Filling Station available. (500 Series)
  • Military Grade Primer & Powder-Coat Paint Finish
VIDEOS
OPTIONS & ACCESSORIES
SPECS & MORE
Model RVB10
Capacity 40 Cubic Feet
Empty Weight 185 lbs.
Overall Length (A) 57"
Body Side Length (B) 35"
Overall Height (C) 28.5"
Width 44"
Depth 49.70"
Spinner Motor 12 Volt, 1/2 HP
Auger Motor 12 Volt, 1/3 HP, 3" Diameter
Spinner 16" Diameter Poly Four Flute
Recommended Use UTV and Larger
Model RVB500
Capacity 1/2 Cubic Yard
Empty Weight 215 lbs.
Overall Length (A) 75.8"
Body Side Length (B) 53.2"
Overall Height (C) 25"
Width 39"
Depth 58.25"
Spinner Motor 12 Volt, 1/2 HP
Auger Motor 12 Volt, 1/3 HP, 3" Diameter
Spinner 16" Diameter Poly Four Flute
Recommended Use UTV, Light Duty and Larger
  • The Revolution V-Box family has a roto molded perimeter with ribbed hopper, mounted to an all stainless steel frame and drive support.
  • The easy on/off stainless steel and roto molded chute has a 16" four flute poly spinner to provide you long life and superior spread pattern up to 30'.
  • The 1/2 horsepower direct drive gear box and 1/3 horsepower spinner motor are fully enclosed so that water and salt does not penetrate.
  • The inside of the poly hopper walls are designed for maximum flow of the toughest materials to minimize size material bridging.
  • One harness supplies all of the power from the battery to the hopper, with a water-tight Duetsch connector and seal to connect them. The harness is plug and play for accessories. No cutting or splicing.
  • Adjustable inverted vee (patent pending). Adjust the inverted vee system to match the material you want to spread.
RS Controller
RS CONTROL Allows you to adjust auger and spinner speed independently using pinwheels to increase or decrease speed of the auger or spinner

RS CONTROL Has:
  • Push Button to: turn on/off vibrator or vibrators
  • Turn on/off optional light
  • Turn on/off optional wetting system
  • All functions can be controlled in Auto Mode

Spreader Materials

Sodium Chloride

Calcium Chloride

Bagged Ice Melters

Bulk Salt – Wet or Dry

50/50 Salt Sand

Sand – Wet or Dry (** Use vibrator motor kit)

Pea Gravel

Magic Salt