Sno-Way International Snow Plows
Sno-Way International Snow Plows
COMMERCIAL Spreader

Revolution V-Box Spreaders Series


Revolution V-Box Spreaders Series Spreader
COMMERCIAL Spreader

The Poly Dual Electric RVB spreaders are built for the professional snow and ice removal specialist. The Revolution Spreader line uses a heavy duty 1/2 horsepower electric motor, direct drive gear box to run the auger and a 1/3 horsepower electric motor, direct drive gear box to run the spinner. The Poly Hopper is mounted on a 304 stainless steel frame and drive support to give you a spreader that will provide you years of service. Sno-Way is known for having the best spread pattern in the industry, and the Sno-Way RVB spreaders will NOT disappoint.

RVB10 RVB500 RVB750 RVB1500 RVB2000 RVB2500
10 Cubic Feet 1/2 Yard 3/4 Yard 1-1/2 Yard 2 Yard 2-1/2 Yard

RS Controller

RVB Truck Bed Salt Spreader Controller RVB Truck Bed Salt and Sand

The intuitive design of the control allows the professional snow and ice removal expert to gain an advantage over competitor's units. Contractors that use the Revolution V-Box spreaders along with the RS control are able to save time, reduce wasted material and get the job done with greater profit.

RS CONTROL Allows you to adjust auger and spinner speed independently using pinwheels to increase or decrease speed of the auger or spinner.

RS CONTROL Has:

  • Push Button to: turn on/off vibrator or vibrators
  • Turn on/off optional light
  • Turn on/off optional wetting system
  • All functions can be controlled in Auto Mode

RS CONTROL Revolutionary CONSTANT DRIVE FEATURE Maintains auger speed and spinner speed to control your output as material loads change on the auger or spinner. Comparable to the cruise control on your truck, when you go up a hill your truck automatically down shifts and accelerates until you are back up to set speed, once you go downhill it will automatically up shift and decelerate until you are back to your speed setting.

RS CONTROL Revolutionary AUTO MODE SETTING Allows the vibrators to cycle on and off when needed. The system monitors the auger to make sure material is flowing through the auger, therefore when the vibrators are needed the system will turn them on, when the auger is flowing the correct amount of material the system will turn the vibrators off. Auto Mode works with the wetting system, it will maintain a predetermined flow rate, if you increase or decrease the auger speed the control will increase or decrease the amount of liquid flowing to the spinner.

All the operator has to do is drive the truck; the control will handle all the functions that are placed in the auto mode.

SWS 30 Salt-Wetting System

Revolution Truck Bed Salt Spreader Pre Wet System
SWS 30 SALT WETTING SYSTEM
Quick Attach Pump Fitting for Easy Maintenance
Sloped Tank Empties Toward Exit - Minimal Fluid (about 1 gallon) Left in Tank
Quick Attach Coupler Used When Removing Chute
Stainless Steel Frame and Mounting Brackets
Holds 30 Gallons of Fluid
Saddles Around the Hopper of the Spreader and Does Not Take Up Extra Room in Bed of Truck
Volume Level Marks on Tank
2 GPM Pump (Output Varies Depending on Control - On/Off 1 GPM - RS Control Varies Upon Spreader Output)

Features

  • Supported by stainless steel frame
  • Custom designed fit to the Sno-Way RVB Spreaders
  • RVB 1500/2000/2500 accepts two tanks
  • 12 Volt DC motor
  • Can use on/off switch or RS Control (patent pending) that handles all spreader controls
  • Quick disconnect couplers for easy use on spreader chute
  • Accelerates melting process
  • Reduces amount of salt needed

Can Use

  • Salt Brine
  • Calcium Chloride Brine
  • Premium Branded Liquids

SWS Filling Station (Optional Accessory)

Refill your 30 gallon Salt Wetting System tank using the Sno-Way optional SWS Filling Station.

Plug the pump into a 120 Volt AC outlet, attach the hose to your liquid and turn on the pump.

SWS 30 gallon tank fills at a top rate of 5 gallons per minute.

In about 6 minutes the tank is full, and you are ready to make more money, and no back breaking work to get it done.

SWS FILLING STATION Optional Accessory
AC Power Driven
5 GPM Pump
Comes with Filler Cap

Revolution V-Box Spreaders Features

The Revolution V-Box family has a roto molded perimeter with ribbed hopper, mounted to an all stainless steel frame and drive support.

The easy on/off stainless steel and roto molded chute has a 16” four cute poly spinner to provide you long life and superior spread pattern up to 30’.

The 1/2 horsepower direct drive gear box and 1/3 horsepower spinner motor are fully enclosed so that water and salt does not penetrate.

The inside of the poly hopper walls are designed for maximum flow of the toughest materials to minim size material bridging.

One harness supplies all of the power from the battery to the hopper, with a water-tight Duetsch connector and seal to connect them. The harness is plug and play for accessories. No cutting or splicing.

Adjustable inverted vee (patent pending). Adjust the inverted vee system to match the material you want to spread.

Optional Wetting System with Filling Station available.

Spreader Accessories

Universal Spreader Light Kit

Universal Spreader Light Kit

Sno-Way’s universal spreader light conveniently mounts to your spreader and supplies excellent illumination for increased visibility during early morning or night salting applications. Includes mount hardware and easy plug and go circuitry. For use with all tailgate and RVB spreaders.
Vibrator Motor Kit

Vibrator Motor Kit

The vibrator motor easily bolts to Sno-Way’s 4, 6, or 9 Cu.-Ft. poly hoppers. The motor provides consistent agitation of spread material for superior flow to the receiver spreader spinner (pictured). Vibrator kit is also available for the RVB Series (not pictured).
Spreader Auxiliary Power Harness

Spreader Auxiliary Power Harness

Sno-Way’s auxillary power harness allows you to easily connect additional spreader accessories to the installed spreader harness on the vehicle without splicing wires. Fast and simple, this harness installs in seconds!
SNO-WAY® RVB SERIES COVER

SNO-WAY® RVB SERIES COVER

Ideal for keeping precipitation from reaching spreader material in the hopper. This Roll Back Retain in Place Cover is a retractable cover that is integrated into the hopper, the cover rolls up and is stowed on the spreader. The cover is durable, reinforced vinyl, and includes dual shock cords with plastic attachment hooks, industrial –strength hem stitching and reinforced corner seams and grommets.
Jam Release Mechanism

Jam Release Mechanism

Jams can happen, even with the best spreaders. This device is a life saver keeping you from digging out the hopper. Simply insert this into the end of the Auger Shaft and the use of a simple ratchet wrench and you are back in business. For use on the RVB spreaders.
RS Controller

RS Controller

The intuitive design of the control allows the professional snow and ice removal expert to gain an advantage over competitors. Contractors that use the new Revolution Series V Box spreaders are able to save time, reduce wasted material and get the job done with greater profit.
SWS 30 Salt-Wetting System

SWS 30 Salt-Wetting System

Custom designed to the Sno-Way Revolution V-Box Spreader and is supported by stainless steel frame. Pre-Wet system accelerates melting process which reduces amount of salt needed.
2

2" Nylon Ratchet Strap Kit

Safely secure your RVB spreader to the work truck with these 2”-wide nylon webbing ratchet straps. These straps have a working load limit of 3,000 pounds each. The minimum break strength rating is 3X the working load limit. Each kit includes four yellow straps. Recommended for use with Sno-Way RVB spreader models.
Anti-Corrosion Compound

Anti-Corrosion Compound

Sno-Way’s non-conductive compound effectively seals against dirt and moisture and provides maximum protection to electrical switches and contacts. Sno-Way recommends liberal compound application to all exposed electrical components for extended wear life.

Revolution V-Box Spreaders Specifications

Model RVB10RVB500RVB750RVB1500RVB2000RVB2500
Capacity 10 Cubic Feet1/2 Yard3/4 Yard1-1/2 Yard2 Yard2-1/2 Yard
Weight 185 lbs.215 lbs.245 lbs.335 lbs.360 lbs.400 lbs.
Height 28.50”25.50”25.375”32”38.40”41”
Width 44”38.50”38.50”49.25”49.25”50.75”
Depth 49.70”68.25”80.25”97”97”104”
Motor 12 Volt, 1/2 HP12 Volt, 1/2 HP12 Volt, 1/2 HP12 Volt, 1/2 HP12 Volt, 1/2 HP12 Volt, 1/2 HP
Auger Motor 12 Volt, 1/3 HP12 Volt, 1/3 HP12 Volt, 1/3 HP12 Volt, 1/3 HP12 Volt, 1/3 HP12 Volt, 1/3 HP
Spinner 16" Diameter Poly Four Flute16" Diameter Poly Four Flute16" Diameter Poly Four Flute16” Diameter Poly Four Flute16” Diameter Poly Four Flute16” Short Chute, 29” Long Chute
  • The Revolution V-Box family has a roto molded perimeter with ribbed hopper, mounted to an all stainless steel frame and drive support.
  • The easy on/off stainless steel and roto molded chute has a 16" four flute poly spinner to provide you long life and superior spread pattern up to 30'.
  • The 1/2 horsepower direct drive gear box and 1/3 horsepower spinner motor are fully enclosed so that water and salt does not penetrate.
  • The inside of the poly hopper walls are designed for maximum flow of the toughest materials to minimize size material bridging.
  • One harness supplies all of the power from the battery to the hopper, with a water-tight Duetsch connector and seal to connect them. The harness is plug and play for accessories. No cutting or splicing.
  • Adjustable inverted vee (patent pending). Adjust the inverted vee system to match the material you want to spread.
  • Optional Wetting System with Filling Station available.


Spreader Materials


Sodium Chloride
Sodium Chloride
Calcium Chloride
Calcium Chloride
Bagged Ice Melters
Bagged Ice Melters
Bulk Salt - Wet or Dry
Bulk Salt
50/50 Salt Sand
50/50 Salt Sand
Sand - Wet or Dry
Sand
Pea Gravel
Pea Gravel
Magic Salt
Magic Salt

Always follow the recommended application directions for the spreader materials.

We doing a photo gallery like this: [Click Here] We will need a Minimum of 3 photos for each plow, if there are more images it should be divisible by 3 prefereably.



Stronger - Smarter - Better through Innovation
The intuitive design of the control allows you to gain an advantage over competitors.
Learn more about all of our patented products.