Sno-Way International Snow Plows
Sno-Way International Snow Plows
LIGHT COMMERCIAL Spreader

6 & 9 - Cu. Ft. Tailgate Salt Spreaders Series


6 & 9  - Cu. Ft. Tailgate Salt Spreaders Series Spreader
LIGHT COMMERCIAL Spreader

When you require more salt spreading capacity for larger driveways, access roads or parking lots, look for Sno-Way 6 and 9 - Cu. Ft. Tailgate Spreaders to deliver. These high-capacity receiver-mount tailgate salt spreaders provide durability and spreading precision that are second to none.

The Sno-Way 6 and its big brother Sno-Way 9 – share the same solid features you expect in a Sno-Way spreader: Poly hopper construction, powder-coated steel frame, tapered Class III hitch, form-fitting poly lid, 12V electric motor and a simple belt drive. However, it’s the value added features that make these tailgate salt spreaders worth every penny.

Variable Speed Control

Tailgate Spreader Variable Speed Controller

Sno-Way’s Variable Speed Control for tailgate spreaders is packed with features that help you get the job done on time and at the right cost. efficiency is the key when spreading salt, and a superior control is the secret to greater efficiency. The Variable Speed Control has an ergonomic design that allows for simple usage in your right or left hand. Action buttons are all within simple reach, and intuitive so you can be in control without even looking at the control.

The Variable Speed Control is available in a wired or wireless configuration - your choice depending on operator and vehicle variables. Features include solid construction, simple speed control with lit speed indicators, and push button control to turn the vibrator on and off.

On/Off control also available for the Sno-Way Tailgate Spreaders.
  • Wired
  • Wireless
  • Simple to use
  • On/o vibrator
  • Increase/decrease speed
  • Lights to show speed

6 & 9 - Cu. Ft. Tailgate Salt Spreaders Features

6 & 9  - Cu. Ft. Tailgate Salt Spreaders Spreader Features Diagram
  1. Enclosed Belt Reduction Drive Under Cover
  2. Form Fitting Poly Hopper Lid With Retainer Strap
  3. Stainless Steel Hardware
  4. Exclusive Chunk Buster™ Salt Breakup System
  5. Fully Adjustable Directional Flow Control Paddles
  6. High Grade Polyethelene 12" Diameter Spinner
  7. Impact Resistant Nylon Rollers
  8. Self-Standing Steel Frame
  9. Tapered Receiver Hitch (Class III)
  10. Military Grade Primer & Powder-Coat Paint Finish
  11. UV Resistant Poly Hopper
  12. High Exterior Mounted Electric Motor
  13. Retainer Strap

Spreader Accessories

Universal Spreader Light Kit

Universal Spreader Light Kit

Sno-Way's universal spreader light conveniently mounts to your spreader and supplies excellent illumination for increased visibility during early morning or night salting applications. Includes mount hardware and easy plug and go circuitry. Use with all Receiver and PDE spreaders.
Vibrator Motor Kit

Vibrator Motor Kit

The vibrator motor easily bolts to Sno-Way's 4-, 6- or 9-Cu.-Ft. poly hoppers. The motor provides consistent agitation of spread material for superior flow to the receiver spreader spinner. Each motor ships with complete mount hardware.
Spreader Auxiliary Power Harness

Spreader Auxiliary Power Harness

Sno-Way's auxiliary power harness allows you to easily connect additional spreader accessories (see vibrator motor and light kits) to the installed spreader harness on the vehicle without splicing wires. Fast and simple, this harness installs in seconds!
Standard Class III Tapered Receiver Hitch

Standard Class III Tapered Receiver Hitch
*Standard*

All Sno-Way tailgate spreader models include a standard Class III tapered hitch. The square tube has an angled face for easy insertion into the receiver on the truck and two adjustment holes to accommodate deeper locking points. All hitches include a 5/8" diameter bent arm hole pin and spring pin lock.
Form-Fitting Poly Lid and Safety Retainer Strap

Form-Fitting Poly Lid and Safety Retainer Strap
*Standard*

Sno-Way 6 and 9 tailgate spreaders each have a large, form-fitting polyethylene lid to keep moisture out of the hopper and away from the spread material. The lid is easily secured using two rubber T-handle latches and - as a safety feature - a standard nylon retainer strap keeps the lid attached to the hopper at all times.
Elevated Belt Reduction Drive Assembly

Elevated Belt Reduction Drive Assembly
*Standard*

All Sno-Way tailgate spreaders use a simple belt reduction drive assembly to transfer power from the electric motor to the spinner. The assembly is protected by a heavy-duty cover and mounted high away from the spread material (Sno-Way 6 and 9 only). Conveniently located, the belt drive tension can be adjusted easily and any maintenance is a snap!
High-Mount External 12V Electric Motor

High-Mount External 12V Electric Motor
*Standard*

Sno-Way 6 & 9 tailgate spreaders use a 1/3-HP, 12V DC electric motor to power the spinner. The sealed motor is mounted outside the hopper and nearly 3’ above the spinner. Weatherproof electrical connectors and sturdy 10 gauge wire connect the motor to the controls.
Fully Adjustable Directional Flow Control Paddles

Fully Adjustable Directional Flow Control Paddles
*Standard*

Sno-Way's exclusive directional flow control paddles can be adjusted to completely shut-off spread material or fully opened for maximum flow. The paddles also direct the spread pattern. From zero to 180 degrees, you can direct the spread pattern at any angle without wasting expensive materials.

6 & 9 - Cu. Ft. Tailgate Salt Spreaders Specifications

Model SW6SW9
Capacity 6 - Cu. Ft.9 - Cu. Ft.
Weight 115 lbs.140 lbs.
Height 43"46"
Width 40"43"
Depth 20"24"
Motor 1/3 HP1/3 HP
Spinner 12" dia.12" dia.
  • Flow Control Paddle (Lockable) - Positive Close to Full Open
  • Impact Resistant Nylon Roller Wheels (Patent Pending)
  • UV Resistant Polyethylene Hopper
  • Powder-Coated Steel Tube / Plate Frame Construction
  • Class III Tapered Receiver Hitch Mount
  • Choose Wired or Wireless
  • Variable Speed Control or On/Off control


Spreader Materials


Sodium Chloride
Sodium Chloride
Calcium Chloride
Calcium Chloride
Bagged Ice Melters
Bagged Ice Melters
Spreader 40 lbs. Bag 80 lbs. Bag
4 - Cu. Ft. 7.5 Bags 3.5 Bags
6 - Cu. Ft. 11.0 Bags 5.5 Bags
9 - Cu. Ft. 16.5 Bags 8.5 Bags

Always follow the recommended application directions for the spreader materials.

We doing a photo gallery like this: [Click Here] We will need a Minimum of 3 photos for each plow, if there are more images it should be divisible by 3 prefereably.



Stronger - Smarter - Better through Innovation
An easy-to-use, super fast drive-in mount system for your snowplow.
Learn more about all of our patented products.