Sno-Way International Snow Plows
Sno-Way International Snow Plows
COMMERCIAL Spreader

5', 6' & 8' - PDE Series


5', 6' & 8' - PDE Series Spreader
COMMERCIAL Spreader

The Poly Dual Electric V-Box Spreaders are built for the professional snow and ice removal specialist. Available in 5', 6', and 8' models. The Poly Dual Electric spreaders use a heavy duty 1/2 horsepower electric motor, direct drive gear box to run the auger and a 1/3 horsepower electric motor, direct drive gear box to run the spinner. The Poly Hopper is mounted on an all stainless steel frame and drive support to give you a spreader that will provide you years of service. Sno-Way is known for having the best spread pattern in the snow removal equipment industry, and the Sno-Way PDE's will NOT disappoint.

The PDE family has a roto molded perimeter with ribbed hopper, mounted to an all stainless steel frame and drive support. The easy on/off stainless steel and roto molded chute has a 16" four flute poly spinner to provide you long life and superior spread pattern up to 30'. The 1/2 horsepower direct drive gear box with a 14.1 gear ratio provides a perfect balance of auger power and amp draw, coupled with a direct drive 1/3 horsepower spinner motor, and a dual control controller, gives you complete control when dispensing materials. The inside of the poly hopper walls are designed for maximum flow of the toughest materials to minimize material bridging.

Sno-Way's PDE salt spreaders - The Last Name in Contractor Grade Snow Removal Equipment.

Spreader Controller

PDE Truck Bed Salt Spreader Controller PDE Truck Bed Salt and Sand

Sno-Way’s PDE V BOX CONTROL is custom designed to work for hard-working contractors.

The intuitive design of the control allows the professional snow and ice removal expert to gain an advantage over competitors. Contractors that use the new PDE series V Box spreaders are able to save time, reduce wasted material and get the job done with greater profit.

No more guessing – Simple buttons for the variable speed auger control allow for a wide range of speed settings. The control will monitor amount of material that flows out of the spreader.

Paired with the auger speed, the operator will have precision control to increase or decrease spinner speed. The command of these two variables is now easier than ever and results in great savings.

Intuitive graphic readouts on the control screen allow the controller to easily gauge the spreader performance as they can see the speed value of the spinner and the auger simultaneously.

A separate auxiliary control function allows separate control for the back-up light.

Very unique feature is the PAUSE program. By pressing the pause/run button the operator turns off all functions yet holds them at the same value so the spreader can start right back up as soon as the truck is repositioned. This saves a great deal of time and reduces the amount of wasted material.

SWS 30 Salt Wetting System

PDE Truck Bed Salt Spreader Pre Wet System

Features

  • Supported by stainless steel frame
  • Custom designed to the Sno-Way PDE V-Box Spreader
  • 12 Volt DC motor
  • Can use on/off switch or in cab control that handles all spreader functions
  • Quick disconnect couplers for easy use on spreader chute
  • Accelerates melting process
  • Reduces amount of salt needed

Can Use

  • Salt Brine
  • Calcium Chloride Brine
  • Premium Branded Liquids

AFS5

  • Automated filling station
  • 5 gallons per minute
  • AC system plugs into standard outlet
  • No back breaking filling process
  • Minimal assembly required

5', 6' & 8' - PDE Features

5', 6' & 8' - PDE Spreader Features Diagram

Spreader Accessories

1

1" Nylon Ratchet Strap Kit

Sno-Way's smallest ratchet strap kit is constructed of 1"-wide nylon webbing that has a working load limit of 850 lbs. each. All straps are 5' long and four are provided in each kit. These ratchet straps are recommended for use with Sno_Way electric V-box spreader models.
Universal Spreader Light Kit

Universal Spreader Light Kit

Sno-Way's universal spreader light conveniently mounts to your spreader and supplies excellent illumination for increased visibility during early morning or night salting applications. Includes mount hardware and easy plug and go circuitry. Use with all Receiver and PDE spreaders.
Vibrator Motor Kit

Vibrator Motor Kit

The vibrator motor easily bolts to Sno-Way's 4-, 6- or 9-Cu.-Ft. poly hoppers. The motor provides consistent agitation of spread material for superior flow to the receiver spreader spinner. Each motor ships with complete mount hardware.
Spreader Auxiliary Power Harness

Spreader Auxiliary Power Harness

Sno-Way's auxiliary power harness allows you to easily connect additional spreader accessories (see vibrator motor and light kits) to the installed spreader harness on the vehicle without splicing wires. Fast and simple, this harness installs in seconds!
Sno-Way PDE SPREADER COVER

Sno-Way PDE SPREADER COVER

Ideal for keeping precipitation from reaching spreader material in the hopper. The Roll Back Retain in Place Cover is a retractable cover that is integrated into the hopper, the cover rolls up and is stowed on the spreader. The cover is durable, reinforced vinyl, and includes dual shock cords with plastic attachment hooks, industrial-strength hem stitching and reinforced corner seams and grommets.
Jam Release Mechanism

Jam Release Mechanism

Jams can happen, even with the best spreaders. This device is a life saver keeping you from digging out the hopper. Simply insert this into the end of the Auger Shaft and the use of a simple ratchet wrench and you are back in business. For use on the PDE series spreaders.
PDE Controller

PDE Controller

The intuitive design of the control allows the professional snow and ice removal expert to gain an advantage over competitors. Contractors that use the new PDE series V Box spreaders are able to save time, reduce wasted material and get the job done with greater profit.
SWS 30 Salt Wetting System

SWS 30 Salt Wetting System

Custom designed to the Sno-Way PDE V-Box Spreader and is supported by stainless steel frame. Pre-Wet system accelerates melting process which reduces amount of salt needed.

5', 6' & 8' - PDE Specifications

Model PDE 800PDE 600PDE 500
Capacity 2 Yards.75 Yards.5 Yards
Weight 360 lbs.244 lbs.215 lbs.
Height 35"25"25"
Width 47"39"39"
Depth 91"72"60"
Motor 12 Volt12 Volt12 Volt
Spinner 16" Diameter Poly Four Flute16" Diameter Poly Four Flute16" Diameter Poly Four Flute

Spreader Materials


Sodium Chloride
Sodium Chloride
Calcium Chloride
Calcium Chloride
Bagged Ice Melters
Bagged Ice Melters

Always follow the recommended application directions for the spreader materials.

We doing a photo gallery like this: [Click Here] We will need a Minimum of 3 photos for each plow, if there are more images it should be divisible by 3 prefereably.



Stronger - Smarter - Better through Innovation
Pre-Wet system accelerates melting process reducing amount of salt needed.
Learn more about all of our patented products.